Shop by Brand
Overview
Solid state electronic flame detectors for use with Honeywell Flame Safeguard controls and amplifiers. Sense ultraviolet radiation produced by combustion of gas, oil, coal or other fuels.
Features
- Mount horizontally, vertically or at any angle in between.
- Provide quick electrical hookup with threaded conduit fitting and color-coded leadwires.
- Reduced nuisance shutdowns by wiring two in parallel.
- C7012E1278 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
- C7012A,E meets NEMA 4 standards with viewing window rated to 20 psi.
- C7012C,F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.
Product Specifications
- Application
- Gas, Oil or Coal fired burners
- Dimensions (in.)
- 5 1/4 in. diameter (includes mounting flange) x 7 7/32 in. long
- Dimensions (mm)
- 133 mm diameter (includes mounting flange) x 183 mm long
- Includes
- Cast case and cover
- Used With
- Flame Amplifiers: R7247C, R7847C
- Weight (lb)
- 4.25 lb
- Weight (kg)
- 1.9 kg
- Comments
- For use with rectification flame signal amplifiers
- Mounting
- 3/4 in. NPT
- Electrical Ratings
- 220 V
- Frequency
- 50 Hz
- Electrical Connections
- 5 NEC Class 1 Color-coded lead wires.
- Power Consumption
- 2.5 W
- Approvals, Swiss RE
- Acceptable
- Approvals, Factory Mutual
- Approved: Report No. 14740.01
- Approvals, Others
- Meets DIN Standards
- Ambient Temperature Range (F)
- 25 F to 175 F
- Ambient Temperature Range (C)
- -4 C to +79 C
- NEMA Rating
- NEMA 4
- Lead Length (in.)
- 96 in.
- Lead Length (mm)
- 2438 mm
Additional Information: Click Here
