M9484E1017 Honeywell Actuator

Datasheet

The Honeywell M9484E1017 90 DEGREE ADJUSTABLE STROKE, 30-60 SECOND TIMING, DUAL END Shaft 20 VA 24 VOLTS 150 LB-IN TORQUE

Overview

Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors.

Features

• Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
• Vibration resistant electronic drive circuit.
• Regulated by three-wire proportional controller.
• Stroke is field-adjustable to 90 or 160 degrees.

Product Specifications

Dimensions (in.)	45 in high x 5.5 in wide x 7.3 in deep
Dimensions (mm)	164 mm high x 140 mm wide x 185 mm deep
Item Type	Product
Frequency	50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.	Listed: File No. E4436, Guide No. XAPX for USA and Canada
Supply Voltage	24 Vac
Power Consumption	15 W
Timing	90 degree stroke– 30 seconds, 160 degree stroke– 60 seconds
Ambient Temperature Range (F)	-40 F to +150 F
Ambient Temperature Range (C)	-40 C to +66 C
Input Signal	135 ohm
Internal Auxiliary Switch	1
Auxiliary Switch Ratings	120 Vac– 7.2 AFL, 43.2 ALR, 40 VA pilot duty opposite contact; At 240 Vac– 3.6 AFL, 21.6 ALR, 40 VA pilot duty opposite contact
Stroke	Adjustable; 90 to 160 degrees, Symmetrical
Shaft Dimensions (in.)	double-ended, 3/8 in. square
Torque Rating (lb-in.)	150 lb-in.
Torque Rating (Nm)	17 Nm
Additional Torque Ratings (lb-in.)	Breakaway– 300 lb-in.
Additional Torque Ratings (Nm)	Breakaway– 34.0 Nm
Auxiliary Switch Setting	1 degree
Factory Stroke Setting	90 degrees
Shaft Dimensions (mm)	double-ended, 9.5 mm square
Deadweight Load on Shaft	Either End– 200 lb (300 lb combined power and auxiliary shafts); 90.8 kg (136 kg combined power and auxiliary shafts);