R7824C1002 Honeywell Flame Amplifier

The Honeywell R7824C1002 3 SECOND Flame FAILURE RESPONSE TIME.

Overview

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

Features

• Flame failure response time of 0.8 or 3.0 seconds (1.0 or 2.0 for CE approved devices).
• Flame signal strength ranges from 0.0 to 5.0 Vdc.
• Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
• Flame signal test jacks to measure amplifier flame signal voltage.
• Color-coded labels identify flame detection type.
• -Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system.
• -Ampli-check tests the amplifier and 7800 SERIES Relay.
• -None (standard) is just tested at normal system startup.
• 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
• Compatible with existing Honeywell flame detectors (order separately).

Product Specifications

Comments	Color: Green
Approvals, Underwriters Laboratories Inc.	Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association	Certified: File No. LR95329-3
Customer Special	Flame Failure Response Time (sec)
0 sec	Approvals, Control Safety Devices
Approvals, Swiss RE	Acceptable
Approvals, Factory Mutual	Approved: Report No. 1V9A0.AF
Self Checking	Dynamic Self-Check
Use With Primary Safety Control	RM7824
Use With Flame Sensor	C7024E, F Flame Detector

Additional Information: Click Here