C7012E1161 Honeywell Flame Sensor

Datasheet

The Honeywell C7012E1161 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking. -20 F to +175 F. 1 in. NPT.

Overview

Solid state electronic flame detectors for use with Honeywell Flame Safeguard controls and amplifiers. Sense ultraviolet radiation produced by combustion of gas, oil, coal or other fuels.

Features

• Mount horizontally, vertically or at any angle in between.
• Provide quick electrical hookup with threaded conduit fitting and color-coded leadwires.
• Reduced nuisance shutdowns by wiring two in parallel.
• C7012E1278 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
• C7012A,E meets NEMA 4 standards with viewing window rated to 20 psi.
• C7012C,F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Product Specifications

Application	Gas, Oil or Coal fired burners
Dimensions (in.)	5 1/4 in. diameter (includes mounting flange) x 7 7/32 in. long
Dimensions (mm)	133 mm diameter (includes mounting flange) x 183 mm long
Includes	Cast case and cover
Used With	Flame Amplifiers: R7247C, R7847C
Weight (lb)	4.25 lb
Weight (kg)	1.9 kg
Comments	Dynamic self-checking flame detector
Mounting	1 in. NPT
Electrical Ratings	120 Vac
Frequency	50 Hz; 60 Hz
Approvals, Canadian Standards Association	Certified: Master Report LR95329-1
Electrical Connections	10 foot 5 conductor cable and 5 PIN connector
Power Consumption	7.0 W
Approvals, Swiss RE	Acceptable
Approvals, Factory Mutual	Approved: Report No. 14740.01
Ambient Temperature Range (F)	-20 F to +175 F
Ambient Temperature Range (C)	-20 C to +79 C
NEMA Rating	NEMA 4
Lead Length (in.)	96 in.
Lead Length (mm)	2438 mm