M9164D1009 Honeywell

THE HONEYWELL M9164D1009 TRADELINE, REPLACES M934A1227, 24V, 50/60HZ, 15VA, 35LB-IN ADJ STROKE 160 DEG 30-60 SEC TIMING; Proportional Modutrol IV Motor, 24Vac, 135 Ohm Control Signal, Non Spring Return, 35 Lb-In Torque, 30-60 Second Nominal Timing, 90-160 Degree Stroke, 16 Degree Factory Stroke Setting, Quick Connect Terminals, Foot Mounted, Dual Ended Square Shaft, .375″ Shaft Dimension, Integral Junction Box Provides Nema 3 Weather Protection

Product Specifications

Application	Electric
Dimensions (in.)	6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deep
Dimensions (mm)	164 mm high x 140 mm wide x 185 mm deep
Weight (lb)	5 lb
Item Type	Product
Mounting	Foot-mounted
Frequency	50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.	Listed: File No. E4436, Guide No. XAPX for USA and Canada
Tradeline Value	Tradeline
Electrical Connections	Quick-connect terminals
Supply Voltage	24V
Power Consumption	Driving– 10 VA
Approvals, CE	EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
Ambient Temperature Range (F)	-40 F to +150 F
Ambient Temperature Range (C)	-40 C to +60 C
Internal Auxiliary Switch	0
Auxiliary Switch Ratings	AFL – 120 Vac– 7.2A; ALR- 120 Vac– 43.2A; AFL – 240 Vac– 3.6A; ALR- 240 Vac– 21.6A
Stroke	Adjustable; 90 to 160 degrees, Asymmetrical
Shaft Dimensions (in.)	375 in. Square
Control Signal	Proportional, 135 ohm
Fail Safe Mode	Non-Spring Return
Torque Rating (lb-in.)	35 lb-in
Torque Rating (Nm)	4 Nm
External Auxiliary Switches Available	Yes
Shaft Rotation (upon control signal increase)	Counter-clockwise (as viewed from power end) (normally open)
Factory Stroke Setting	160 degrees
Timing, Nominal	30-60 sec
Feedback	No
Shaft Dimensions (mm)	10 mm Square
Motor shafts	Dual-ended shaft
Deadweight Load on Shaft	Either End– 200 lbs.; Combined on both Shafts– 300 lbs.
Internal Transformer	None

Additional Information

Click here for more information!