M9484D1010 Honeywell Motor

The Honeywell M9484D1010 Reversing, proportional motor used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors. 24 Vac Modutrol IV Motor with 150 lb-in torque rating.

 Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
Vibration resistant electronic drive circuit.
Regulated by three-wire proportional controller.
Stroke is field-adjustable to 90 or 160 degrees

Overview

Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors.

Features

• Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
• Vibration resistant electronic drive circuit.
• Regulated by three-wire proportional controller.
• Stroke is field-adjustable to 90 or 160 degrees.

Product Specifications

• Dimensions (in.)
  • 45 in high x 5.5 in wide x 7.3 in deep
• Dimensions (mm)
  • 164 mm high x 140 mm wide x 185 mm deep
• Item Type
  • Product
• Frequency
  • 50 Hz; 60 Hz
• Approvals, Underwriters Laboratories Inc.
  • Listed: File No. E4436, Guide No. XAPX for USA and Canada
• Supply Voltage
  • 24 Vac
• Power Consumption
  • 15 W
• Timing
  • 90 degree stroke– 30 seconds, 160 degree stroke– 60 seconds
• Ambient Temperature Range (F)
  • -40 F to +150 F
• Ambient Temperature Range (C)
  • -40 C to +66 C
• Switch Ratings
  • At 120 Vac– 7.2 AFL, 43.2 ALR, 40 VA pilot duty opposite contact; At 240 Vac– 3.6 AFL, 21.6 ALR, 40 VA pilot duty opposite contact
• Input Signal
  • 135 ohm
• Stroke
  • Adjustable; 90 to 160 degrees, Symmetrical
• Shaft Dimensions (in.)
  • double-ended, 3/8 in. square
• Torque Rating (lb-in.)
  • 150 lb-in.
• Torque Rating (Nm)
  • 17 Nm
• Additional Torque Ratings (lb-in.)
  • Breakaway– 300 lb-in.
• Additional Torque Ratings (Nm)
  • Breakaway– 34.0 Nm
• Factory Stroke Setting
  • 160 degrees
• Shaft Dimensions (mm)
  • double-ended, 9.5 mm square
• Deadweight Load on Shaft
  • Either End– 200 lb (300 lb combined power and auxiliary shafts); 90.8 kg (136 kg combined power and auxiliary shafts);