The Johnson Controls VA9104-GGA-3S ELECTRIC Valve Actuator; NSR 0-10 VDC PROP Control NO SW W/Terminal Block FOR VG1000 Ball ValveS
The VA9104 Series Actuators are direct-mount, non-spring return electric valve actuators that operate on AC 24 V power. Use these synchronous motor-driven actuators to provide accurate positioning on Johnson Controls® VG1000 Series DN15, DN20, and DN25 (1/2, 3/4, and 1 in.) ball valves in Heating, Ventilating, and Air Conditioning (HVAC) applications. The VA9104 Series Electric Non-Spring Return Actuators provide a running torque of 35 lb⋅in (4 N⋅m). The nominal travel time is 60 seconds at 60 Hz (72 seconds at 50 Hz) for 90° of rotation.
Features
- 35 dBA nominal audible noise rating meets the audible noise requirements for open ceiling environments: whisper quiet operation will not disturb building occupants
- synchronous drive provides a constant rotation time that is independent of the load
- 100,000 cycle rating provides years of trouble-free service
- direct mounting with single screw reduces installation time and cost
- manual override allows for manual positioning of the valve, independent of a power supply
- plenum cable with integral connector for 3/8 in. (10 mm) flexible metal conduit or screw terminal electrical connections make wiring quick and easy while allowing for ceiling plenum applications