C7061A1053 Honeywell Flame Sensor

Datasheet

The 120 Vac Flame Sensor C7061A1053

Overview

Dynamic self-checking flame detector used with R7861 Dynamic Self-check Amplifiers for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.

Features

• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the UV sensor tube checking function.
• Can be mounted horizontally, vertically or at any angle in between.
• The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.
• Field replaceable ultraviolet sensing tube and quartz viewing window.
• Models with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
• C7061A1038 or A1046 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
• Two detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
• Protective heat block built into mounting flange.
• -40 F (-40 C) rated ultraviolet sensing tube is supplied.
• C7061E meets NEMA 4 standards with viewing window rated to 20 psi.
• C7061F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Product Specifications

Application	Gas fired burners; Oil fired burners
Used With	Flame Amplifiers: R7861
Comments	Dynamic self-checking flame detector
Mounting	1 in. NPT
Electrical Ratings	120 Vac
Frequency	50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.	Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association	Certified: Master Report LR95329-1
Electrical Connections	Color-coded lead wires
Approvals, Swiss RE	Acceptable
Approvals, Factory Mutual	Approved: Report No. 14740.01
Ambient Temperature Range (F)	-40 F to +175 F
Ambient Temperature Range (C)	-40 C to +79 C
NEMA Rating	NEMA 4
Lead Length (in.)	96 in.
Lead Length (mm)	2438 mm

Additional information here