The Honeywell M8185D1006 Modutrol motor 60 lb-in, SR Actuator, Two Position, Low Voltage, 24V
The Series 41 and Series 81 Modutrol IV Motors are 2-position (line- and low- voltage control, respectively) spring-return motors. They are used to operate dampers or valves in applications where it is necessary or desirable to have the controlled element return to the starting position in the event of power failure or interruption.
Product Specifications
Application | Electric |
Dimensions (in.) | 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in. deep |
Dimensions (mm) | 164 mm high x 140 mm wide x 222 mm deep |
Weight (lb) | 8.5 lb |
Item Type | Product |
Mounting | Foot-mounted |
Frequency | 50 Hz; 60 Hz |
Approvals, Underwriters Laboratories Inc. | Listed: File No. E4436, Guide No. XAPX for USA and Canada |
Tradeline Value | Tradeline |
Electrical Connections | Quick-connect terminals |
Supply Voltage | 24V |
Power Consumption | Driving– 20 VA |
Approvals, CE | EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD) |
Ambient Temperature Range (F) | -40 F to +150 F |
Ambient Temperature Range (C) | -40 C to +60 C |
Internal Auxiliary Switch | 0 |
Auxiliary Switch Ratings | AFL – 120 Vac– 7.2A; ALR- 120 Vac– 43.2A; AFL – 240 Vac– 3.6A; ALR- 240 Vac– 21.6A |
Stroke | Adjustable; 90 to 160 degrees, Asymmetrical |
Shaft Dimensions (in.) | 0.375 in. Square |
Control Signal | Two position, SPST |
Fail Safe Mode | Spring Return |
Torque Rating (lb-in.) | 60 lb-in. |
Torque Rating (Nm) | 6.8 Nm |
External Auxiliary Switches Available | Yes |
Shaft Rotation (upon control signal increase) | Clockwise (as viewed from power end) (normally closed) |
Factory Stroke Setting | 160 degrees |
Timing, Nominal | 30-60 sec |
Feedback | No |
Shaft Dimensions (mm) | 10 mm Square |
Motor shafts | Dual-ended shaft |
Deadweight Load on Shaft | Either End– 200 lbs.; Combined on both Shafts– 300 lbs. |
Internal Transformer | None |