*Functional Replacement for M6284D1000
Series 62 Modutrol IV Motors are non-spring return floating control motors used with controllers that provide a switched spdt or floating output to operate dampers or valves. These motors also have an internal electrically isolated feedback potentiometer that provides indication of the motor shaft position and can be used for slaving Series 90 Motors or rebalancing an external control circuit.
Product Specifications
- Application
- Electric
- Dimensions (in.)
- 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deep
- Dimensions (mm)
- 164 mm high x 140 mm wide x 185 mm deep
- Includes
- Slave with Series 90 Motors
- Weight (lb)
- 6.5 lb
- Comments
- non-linear feedback, for slaving applications only
- Item Type
- Product
- Mounting
- Foot-mounted
- Frequency
- 50 Hz; 60 Hz
- Approvals, Underwriters Laboratories Inc.
- Listed: File No. E4436, Guide No. XAPX for USA and Canada
- Tradeline Value
- Tradeline
- Electrical Connections
- Quick-connect terminals
- Supply Voltage
- 24V
- Power Consumption
- Driving– 15 VA
- Approvals, CE
- EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
- Ambient Temperature Range (F)
- -40 F to +150 F
- Ambient Temperature Range (C)
- -40 C to +60 C
- Internal Auxiliary Switch
- 0
- Auxiliary Switch Ratings
- AFL – 120 Vac– 7.2A; ALR- 120 Vac– 43.2A; AFL – 240 Vac– 3.6A; ALR- 240 Vac– 21.6A
- Stroke
- Adjustable; 90 to 160 degrees, Symmetrical
- Shaft Dimensions (in.)
- 0.375 in. Square
- Control Signal
- Floating
- Fail Safe Mode
- Non-Spring Return
- Torque Rating (lb-in.)
- 150 lb-in.
- Torque Rating (Nm)
- 17 Nm
- External Auxiliary Switches Available
- Yes
- Shaft Rotation (upon control signal increase)
- Dependent on wiring (normally closed)
- Factory Stroke Setting
- 160 degrees
- Timing, Nominal
- 30-60 sec
- Feedback
- Yes
- Shaft Dimensions (mm)
- 10 mm Square
- Motor shafts
- Dual-ended shaft
- Deadweight Load on Shaft
- Either End– 200 lbs.; Combined on both Shafts– 300 lbs.
- Internal Transformer
- None