SY10-110 Belimo Actuator

Datasheet

The Belimo SY10-110 non-spring return actuator, 22250 in-lb torque, On/Off control, 120V, Nema 4x, 2 SPDT, 10A 250V, reversable, 1/2″ conduit connector, screw terminals

SY Series actuators are fractional horsepower devices, and utilize full-wave
power supplies. Observe wire sizing and transformer sizing requirements.
Proportional models CANNOT be connected to Belimo direct coupled (AF,
AM, GM…etc) actuator power supplies or any type of half-wave device. You
MUST use a separate, dedicated transformer or power supply to power the SY actuator. Please do not connect other automation equipment to the dedicated SY supply source. You MUST use four wires (plus a ground) to control a proportional control SY actuator (See SY Wiring Section).

Specifications

• Actuator Type
  • Non fail-safe
• Angle of Rotation
  • 90°
• Application
  • Water
• Auxiliary Switches
  • 2 x SPDT
• Control Type
  • Floating/3-point
• Degree of Protection
  • IP66/67, NEMA 4X, UL Enclosure Type 4X
• Electrical Connection
  • Terminals
• Protection category
  • IP66/67
• Running Time (Motor)
  • 62 s
• Torque
  • 22130 in-lb [2500 Nm]
• Voltage AC/DC
  • AC 120 V