2-1/2″ 2-Way, Two Position, SR, N.C., 24V, 133 lb-in, w/MA41-7153 & AV-607
Valve Assembly:
- Body Size: 2-1/2 in
- Configuration: 2-Way
- Type: Globe
- Connection: Flanged
- Stem Flow Action: Stem up A closed
- Material Trim: Brass
- Flow Coefficient: 56 cv
- Close-Off Pressure: 125 PSI
- Actuator Type: Electric
- Control Signal: 2-Position (On/Off)
- Loss of Power Type: Spring Return
- Loss of Power Position: Normally closed
- Power Input Voltage: 24 VAC/VDC, 22 to 30 VDC
- Leads and Connections: 3 ft Appliance
- Torque: 133 in-lb
- Mechanical Movement: Rotary
- Protection Rating: NEMA 1, NEMA 2
Assembly Components:
- Valve Body: VB-8223-0-5-12
- Valve Range: Balanced Plug Technology
- Valve Linkage: AV-607-1
- Actuator: MA41-7153
- Actuator Range: SmartX Actuator
- Actuator Comment: NEMA 1. NEMA 2 (IEC IP54) with conduit connector in the down position.
Actuator Comment | NEMA 1. NEMA 2 (IEC IP54) with conduit connector in the down position. |
Actuator Housing Material | Aluminum die cast |
Actuator Type | Electric |
Actuator Use | Butterfly Valves |
Dampers | |
Globe Valves | |
Auxiliary Switch | 1 SPDT |
Body Size | 65 mm (2-1/2 in) |
By Schneider | Yes |
California Residents | WARNING:This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Close-Off Pressure | 125 psi |
862 kPa | |
Conduit Connection | 1/2 in |
Configuration | 2-Way |
Connection Type | Flanged |
Control Signal | 2-Position (On/Off) |
Feedback Signal | 2 to 10 VDC |
Flow Characteristic | Modified equal percentage |
Flow Coefficient | 48.43 kvs |
56.00 cv | |
Humidity | 5 to 95% non-condensing |
Insulation Class | Class II |
IP Protection Rating | IP10 |
IP11 | |
Lead Length | 3 ft |
Leads and Connections | Appliance |
Loss of Power Position | Normally closed |
Loss of Power Type | Spring Return |
Material Body | Cast iron |
Material Packing | Spring-loaded PTFE/EPDM |
Material Plug | Brass forged |
Material Seat Port A | Brass |
Material Trim | Brass |
Mechanical Movement | Rotary |
Media Compatibility | Glycol 25% |
Glycol 30% | |
Glycol 50% | |
Steam | |
Water | |
Motor Type | DC Brushless |
Override | Automatic reset |
Pipe Size | 2-1/2 in |
Position Indicator | Pointer and scale from -5 to 90 degrees (-5 degrees is the normal, or spring-return, position) |
Power Consumption Holding Watts | 2.80 W |
Power Consumption Running Amps | 0.29 Amp |
Power Consumption Running VA | 9.80 VA |
Power Consumption Running Watts | 7.50 W |
Power Input Frequency | 50 Hz |
60 Hz | |
Power Input Voltage | 22 to 30 VDC |
24 VAC | |
24 VDC | |
Power Input Voltage AC Tolerance | Plus or minus 20% |
Power Input Voltage DC Tolerance | Plus 25% or minus 8% |
Pressure Allowable Static | Class 125 with 200 PSIG up to 150 F decreasing to 169 PSIG at 281 F |
Pressure Class | 125 ANSI |
Pressure Saturated Steam Maximum Inlet | 242 kPa |
35 psi | |
Product Range | Balanced Plug Technology |
Product Series | VB-8200 |
Rangeability | Greater than 100:1 |
Rotation | 95 degrees |
Seat Leakage Port A | ANSI IV (0.01%) |
Stem Flow Action | Stem up A closed |
Stem Movement | Linear |
Stroke Auto Calibration | No |
Stroke Distance | 1 in |
Temperature Ambient Operating Range | -30 to 60 C (-22 to 140 F) |
Temperature Range Fluid | -7 to 138 C (20 to 281 F) |
Temperature Range Saturated Steam | -7 to 138 C (20 to 281 F) |
Temperature Shipping and Storage Range | -40 to 71 C (-40 to 159.8 F) |
Type | Globe |