FX20-1 Fireye Servo Motor

Datasheet

The Fireye FX series servo motors are precision actuators designed to accurately position valves and dampers. The servo motor interprets Modbus commands from an external control and uses a stepper motor to drive to the commanded position.
The FX series servo motors offers maximum output torque ratings of 4Nm/3ft.-lb., 20Nm/15ft.-lb. or 50Nm/37ft.-lb. The fastest available travel time is 30 seconds for 90 degrees of rotation. The slowest travel time available varies by size. Maximum rotation angle of the drive shaft is 100 degrees

Fastest actuating time for 90° angle of rotation: 30 seconds

Slowest actuating time for 90° angle of rotation: 368.4 seconds

Nominal torque: 20Nm/15ft.-lb.

Maximum angle of rotation: 100°

Nominal voltage 24 VDC ± 10%

Nominal power consumption: 15W nominal, 35W peak

Angle of rotation limited by: Firmware

Degree of protection: NEMA 4 IP 65 (see note below)

Installation orientation: Any

Working temperature range: -4°F to +140°F (-20°C to +60°C)

Duty cycle: 100%

Weight: 5.43 lb. / 2.46 kg.